Get In Touch!

If you have any problems or questions about our products or need our support and assistance, please contact us and you will be replied within 24 hours. We promise we will never reveal your information to the third party. Thank you!

Contact Us For Help

Importance Of Slag Formation Removal In Blast Furnace

Sulphur removal in ironmaking and oxygen steelmaking

Sulphur removal in ironmaking and oxygen steelmaking

the blast furnace BF, during hot metal HM pretreatment, in the converter and during the secondary metallurgy SM treatment. For sulphur removal a low oxygen activity and a basic slag are required. In the BF typically 90 of the sulphur is removed still,the HM contains about 0.03 of sulphur. Different HM desulphurisation processes are used worldwide.

GCSE CHEMISTRY Extraction of Iron in the Blast Furnace

GCSE CHEMISTRY Extraction of Iron in the Blast Furnace

Silicon dioxide is solid at the furnace temperature and the furnace would become blocked if it was not removed. Silicon dioxide reacts with calcium oxide to form calcium silicate called slag which is liquid in the furnace. Slag flows to the bottom of the furnace where

High Alumina Slag and Blast Furnace Operation IspatGuru

High Alumina Slag and Blast Furnace Operation IspatGuru

May 27, 2013 High Alumina Slag and Blast Furnace Operation. Blast furnace BF process of ironmaking is a process where liquid iron hot metal and liquid slag are produced by the reduction of iron bearing materials sinter and or pellet and lump ore with coke and by fluxing of the gangue material of the feed materials.

Blast Furnace Control using Slag Viscosities and Liquidus

Blast Furnace Control using Slag Viscosities and Liquidus

Abstract The viscosity of molten slag in blast furnace operations is an important process variable, influencing the rate and location of reactions inside the furnace, as well as the ease with which the final slag could be removed from the furnace.

The Importance of Metallurgical Slags and Their Evaluation

The Importance of Metallurgical Slags and Their Evaluation

Aug 20, 2019 In an electric arc furnace, the slag formation process can be controlled by addition of oxygen, carbon and slag formers such as lime CaO and magnesia MgO to the melt. Uses of slag. This by-product of the blast furnace has many uses, including Portland cement, masonry, ready-mix concrete, precast concrete, hot mix asphalt aggregate, rural ...

Phosphate removal using blast furnace slags and opoka

Phosphate removal using blast furnace slags and opoka

Jan 01, 2000 Blast furnace slag retains phosphorus efficiently and therefore this material is a possible alternative as a filter material for the removal of P from wastewaters. The P removal is connected to strongly alkaline conditions pH 9 and large amounts of soluble Ca.

Phosphate Removal Using Blast Furnace Slags and

Phosphate Removal Using Blast Furnace Slags and

Two possible lter materials are blast furnace slag and a siliceous sedimentary rock known under the name opoka in Poland and Russia Kuchkaeva et al., 1990. Blast furnace slag is an industrial by-product that derives from the separation of iron from ore. This material has proved to have a high P sorption capacity as has been shown earlier in

Blast Furnace Slag an overview ScienceDirect Topics

Blast Furnace Slag an overview ScienceDirect Topics

Blast furnace slag is used successfully in mud-to-cement conversion worldwide because of its economic, technical, and environmental advantages Pessier et al., 1994 . Slag-mix slurries were used as primary, temporary abandonment and sidetrack plug cements

Slag and its Role in Blast Furnace Ironmaking IspatGuru

Slag and its Role in Blast Furnace Ironmaking IspatGuru

Aug 07, 2015 For the smooth operation of the blast furnace, the slag is required to satisfy the following conditions. The volume of the slag is to be as low as feasible. The slag is to have capacity for the removal of the alkalis, It is to fulfil the requirements for the desulphurisation. The composition of the primary slag must be uniform.

Viscosities of Iron Blast Furnace Slags

Viscosities of Iron Blast Furnace Slags

The principal components of current iron blast furnace BF slags are described by the system Al 2 O 3 CaOMgOSiO 2. 1,2 The targets of the optimum slag compositions are to minimise slag mass and operating temperature whilst satisfying requirements for removal of sulphur and alkali, and slag tapping. 2 In modern ironmaking operations, the hot metal and slag temperatures can be ...

STRATEGIES FOR THE PRODUCTION OF LOW SILICON

STRATEGIES FOR THE PRODUCTION OF LOW SILICON

the sulphur removal in blast furnace, as expressed by sulphur distribution ratio LS, would be higher with i Increase in slag basicity CaOSiO 2 ratio, its volume and temperature. ii Lower oxygen potential, i.e. a lower FeO content in the slag. Desulphurisation starts from bosh area of blast furnace but does not get completed in this region

The Carbon Cost of Slag Production in the Blast Furnace A

The Carbon Cost of Slag Production in the Blast Furnace A

The quality of raw materials iron ore, coal, and coke has a clear impact on the carbon emissions of the hot metal production in steel making. So far, very little work has been done to measure and quantify this impact. Yet for benchmarking, technology choice and general carbon optimization are important elements. The total slag production of a blast furnace gives an accurate and relevant ...

What is the equation for the formation of slag Answers

What is the equation for the formation of slag Answers

Metals are extracted from their ores which contain several impurities, the lighter impurities are removed by slag formation. ... what is the density of liquid blast furnace slag.

Extraction of Iron Metallurgy Blast Furnace and Reactions

Extraction of Iron Metallurgy Blast Furnace and Reactions

A blast furnace is a gigantic, steel stack lined with refractory brick where the concentrated iron ore, coke, and limestone are dumped from the top, and a blast of hot air is blown into the bottom. All the three ingredients are crushed into small round pieces and mixed and put on a hopper which controls the input.

Sulphur removal in ironmaking and oxygen steelmaking

Sulphur removal in ironmaking and oxygen steelmaking

impact on the importance of the chemical equations. The removal of sulphur is based on one principle to move the dissolved sulphur from the iron to the slag, after which the slag layer is separated from the metal. This leads to the following reaction, for the sulphur transfer between the metal and slag2,9 S Fe O 2 slag S 2 slag ...

Extracting iron Iron and aluminium GCSE Chemistry

Extracting iron Iron and aluminium GCSE Chemistry

in a huge container called a blast furnace. Iron ores such as haematite contain ironIII oxide, Fe 2 O 3.The oxygen must be removed from the ironIII oxide in order to leave the iron behind.

Basics of slag production Article on the slag industry

Basics of slag production Article on the slag industry

Oct 27, 2011 In tonnage terms, blast furnace slag is at present the main type followed by slags from the Basic Oxygen Steelmaking BOS and Electric Arc Furnace EAF processes. Various other processes such as external desulphurisation of steel may generate significant amounts of slag at some plants but overall they are only a small proportion of the total.

Sulphur removal in ironmaking and oxygen steelmaking

Sulphur removal in ironmaking and oxygen steelmaking

where sulphur can be removed in the blast furnace BF, during hot metal HM pretreatment, in the converter and during the secondary metallurgy SM treatment. For sulphur removal a low oxygen activity and a basic slag are required. In the BF typically 90 of the sulphur is removed still, the HM contains about 0.03 of sulphur.

Ground Granulated Blast Furnace Slag GGBS Chemical

Ground Granulated Blast Furnace Slag GGBS Chemical

May 09, 2018 Ground Granulated Blast Furnace Slag GGBS The importance of Ground Granulated Blast Furnace Slag GGBS lies in its greener way to become a substitute in concrete material. GGBS being a waste material, it needs proper method for disposal. So incorporating this waste material in concrete can reduce the depletion of conventional concrete components such as cement, fine

High Temperature Properties of BOF Slag and its

High Temperature Properties of BOF Slag and its

Slag formation in the bosh and raceway is an important issue in the blast furnace process. SSAB works in Lulea operate with 100 olivine pellets. A small amount of basic fluxes is added from the top, slag and limestone are used. To improve the control of slag formation, a con-

Phosphate removal using blast furnace slags and opoka

Phosphate removal using blast furnace slags and opoka

Jan 01, 2000 Two materials were used in the experiments blast furnace slag and opoka. The former is an industrial by-product derived from iron ore processing. Two kinds of slag were used, crystalline slag CS and amorphous slag AS. The slag materials were available in two particle sizes, 00.125 mm FineF and 0.254 mm CoarseC respectively.

Possible Uses of Steelmaking Slag in Agriculture An

Possible Uses of Steelmaking Slag in Agriculture An

steel scrap. The main production routes are the ironmaking iron ore based on Blast Furnace BF followed by steelmaking in the Basic Oxygen Furnace BOF, and the ... important challenges such as technologies development, production facilities maintenance ... The slag formation is the result of a

Impact of Ground Granulated Blast Furnace Slag on High

Impact of Ground Granulated Blast Furnace Slag on High

Ground Granulated Blast Furnace Slag GGBS GGBS, being the by-product from blast furnace, contains cementitious properties. To develop ultra high-performance concrete, higher cement content 600kgm3 is required, which in turn, results in higher heat of hydration.

Blast Furnace Slag Cement Manufacture Properties and Uses

Blast Furnace Slag Cement Manufacture Properties and Uses

Blast furnace slag cement is the mixture of ordinary Portland cement and fine granulated blast furnace slag obtained as a by product in the manufacture of steel with percent under 70 to that of cement. Ground granulated blast furnace slag cement GGBFS is a fine glassy granules which contain cementatious properties.

Dual slag filters for enhanced phosphorus removal from

Dual slag filters for enhanced phosphorus removal from

The phosphorus P removal of five combinations of dual filters consisting of blast furnace slag BFS, argon oxygen decarburisation slag AOD and electric arc furnace slag EAF was evaluated in column experiments with domestic waste water. The columns were fed with waste water for 24 days.

Analytical Evaluation of Properties of BlastFurnace Slag

Analytical Evaluation of Properties of BlastFurnace Slag

crushed stone produced from blast-furnace slag. If consider that amount of slag per one ton of iron should be 0.8-1.2 t according to technology of blowing furnace, it is natural that physical properties of early slag will be defined by a system converter slag - blast-furnace crushed stone - coke ash.

Latest News

Copyright © 2021.Henan Antek Mining Machinery Co., ltd. All rights reserved. Sitemap